A 3D printing workbench in your browser. It reads your G-code to find the one cause behind a failed print, gives you settings checked against your printer, and designs the part you need from a description. Talk to it or type.
Free plan, no card needed. 424 printers and 961 filaments built in. Includes Mini Beast.
Pick what you see, add photos, drop in the G-code or 3MF. It reads what your printer was actually told to do (temperatures, fan spikes, flow, hand-added overrides) and finds the one cause behind all of it.
"Corners lift and it goes soft at layer 488"
Numbers come from the filament maker's own slicer profile, for 961 filaments from 64 brands, and are checked against your hotend, bed, enclosure, nozzle and dryer. Export straight into OrcaSlicer, Bambu Studio or PrusaSlicer.
PPA-CF on a 0.4 mm brass nozzle → Stop
Describe the part, its measurements and what it attaches to. It builds a solid model, sets it on your bed and checks it fits. Change it in plain English, then download the STL.
"Clip for a 25 mm pipe, two #8 screw holes"
Print one small test piece, measure it, and get the exact hole and contour compensation for your slicer.
Hole 9.62 mm → hole compensation +0.19 mm
Every box has a microphone. Talk mode gives you a hands-free back-and-forth at the printer, with answers read aloud.
Eighteen common failures explained, spool drying reminders, print cost from every file, and a journal that remembers what fixed things last time. Browse the library.
These are in design and testing now. Founding members get each one as it launches.
The OrcaSlicer engine, with every printer, filament and process preset it ships. Slice and send to your printer through Mini Beast, with no software to install.
Short guided test prints for each filament on your own printer: temperature tower, flow, pressure advance, retraction and max speed. Tap the best result and your own preset builds itself.
Photograph the broken part with a coin or ruler for scale, type two or three measurements, and get an editable part. Refine it by chat: "make the hole 6 mm."
Drop in a scan from Polycam, KIRI, Scaniverse, Creality or Revopoint. It shrinks big scans before upload, fills holes, lays the part flat, and can rebuild mechanical parts as editable CAD.
For detailed work: feature history, sketches with dimensions and constraints, named parameters, and STEP in and out to FreeCAD, Fusion and Onshape.
A "?" button on every screen walks newcomers through each step. Pros switch the tips off and the button stays put.
Nobody gets forced into calibrating. Each filament has a picker, and you can switch any time.
Every printer and filament preset OrcaSlicer ships. The default, and a good place to start.
Built by Beast Tune on your own printer and spool. Every printer and spool is a little different, so this is how you get the last bit of quality.
Bring the presets you already trust from your slicer.